Only requires a small blood sample and allows you to get results in seconds.

Provides accurate results, so you and your veterinarian can stay on top of your pal’s health.

Specifically validated and calibrated for both dogs and cats.

Kit contains everything you need to get started—all in one box.

• All Weights: Gather all supplies needed to perform the test. Choose a capillary sampling site. Check test strip expiry date on the vial. Then snap off the cap on the lancing device at an angle. Insert a new lancet firmly into the blue lancet holder cup. (This may cock the device.) Replace the cap until it snaps or clicks into place. Be careful not to touch the exposed needle on the lancet. The lancing device offers 9 different settings (including half settings). Level 1 is the shallowest depth; Level 5 is the deepest. Pull back the grey slider until it clicks. Turn meter on by inserting the test strip with butterfly facing up and flying into the meter. Make sure the dog or cat code on the meter match the code on the test strip vial. If necessary, change the code on the meter by pressing M or C. Obtain a small blood drop from the animal. Touch only one side of the test strip sample area to the blood drop and wait for the beep (if sound is on). Results will appear after seconds.

• All Weights: Gather all supplies needed to perform the test. Choose a capillary sampling site. Check test strip expiry date on the vial. Then snap off the cap on the lancing device at an angle. Insert a new lancet firmly into the blue lancet holder cup. (This may cock the device.) Replace the cap until it snaps or clicks into place. Be careful not to touch the exposed needle on the lancet. The lancing device offers 9 different settings (including half settings). Level 1 is the shallowest depth; Level 5 is the deepest. Pull back the grey slider until it clicks. Turn meter on by inserting the test strip with butterfly facing up and flying into the meter. Make sure the dog or cat code on the meter match the code on the test strip vial. If necessary, change the code on the meter by pressing M or C. Obtain a small blood drop from the animal. Touch only one side of the test strip sample area to the blood drop and wait for the beep (if sound is on). Results will appear after seconds.

2. AlphaTRAK 2 Blood Glucose Monitoring System Starter Kit serves as an easy 3 step process to test your pet’s blood sugar levels. It only requires a small blood sample and allows you to get results in seconds. It’s specifically validated and calibrated for both dogs and cats.

3. Gather all supplies needed to perform the test. Choose a capillary sampling site. Check test strip expiry date on the vial. Then snap off the cap on the lancing device at an angle. Insert a new lancet firmly into the blue lancet holder cup. (This may cock the device.) Replace the cap until it snaps or clicks into place. Be careful not to touch the exposed needle on the lancet. The lancing device offers 9 different settings (including half settings). Level 1 is the shallowest depth; Level 5 is the deepest. Pull back the grey slider until it clicks. Turn meter on by inserting the test strip with butterfly facing up and flying into the meter. Make sure the dog or cat code on the meter match the code on the test strip vial. If necessary, change the code on the meter by pressing M or C. Obtain a small blood drop from the animal. Touch only one side of the test strip sample area to the blood drop and wait for the beep (if sound is on). Results will appear after seconds.

4. Use only AlphaTRAK control solution with the AlphaTRAK 2 meter. Control solution results are accurate only between 59° – 104° F. Do not add water or other liquid to control solution.